Wifi Control Light Holder

Basic Info

Model No.: SD2-WR

Additional Info

Packaging: color box

Transportation: Ocean,Air

Port: SHANGHAI

Product Description

Product Information :

     The SD2-WR is an E27 dimming head with both RF remote control and WIFI control. The main function is to connect the Wi-Fi device to control the switch, brightness and time switch of the Wi-Fi device via RF transmitter or mobile APP.

• Continuous power-on-off 3 times or more (each power-on time should not exceed 3 seconds): enter the EZ distribution network state, the output light flashes with low brightness, at this time, the distribution network can be configured according to the EZ configuration method;
• Continuous power-on again when flashing - Power off 3 times or more (no more than 3 seconds per power-on time): Enter the AP distribution network state, and the output light flashes slowly with low brightness. At this time, the AP can be configured according to the AP configuration method.
• The RF selects any set of ON/OFF within 3 minutes after flashing, by pressing ON first and then pressing OFF.
• Note: After flashing for more than 6 seconds, the power will be turned off and will not flash when the power is turned on next time. The flashing will also stop after 3 minutes of continuous flashing.

Features: